Hey everyone,this was our first stage in our Fallout Package were doing on this 350z,we received it looking dull and pink in some areas,major swirls,rock chip damage,and scuff and scratches. We first went threw and pin pointed the flaws in the paint surface,found numerous scratches and heavy oxidation,so we Foam washed it and Clay barred the vehicle and washed again, after this we dried it and proceeded to tape off everything to avoid wasted time cleaning compound off trim windows and such, Using our Flex Vrg 3401 with orange pad and Chemical Guys CG1 compound we made our first pass over the car,next was the polish on our Porter Cable with orange pad using Chemical guys All in One Polish,this was our second pass over each panel,after the polish we glazed it with our Porter Cable with a white pad and then machine buffed after drying,after the 3rd pass on each panel we sealed it with M-seal and allowed to cure for 25 min and buffed off then applied a second coat on top of that. After the seal finally dried up and buffed off we and applied Chemical guys Butter Wax and let dry and buffed to a shine.

Interior was fairly clean,just a real good cleaning and dressed everything up nicely.